How to Replace Front CV Axles 2000-2006 Toyota Tundra

Buy Now!
New CV Axle Assembly from 1AAuto.com http://1aau.to/ib/1AACV00389

This video shows you how to install a new front CV axle from TRQ on your 2000-2006 Toyota Tundra. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This process should be similar on the following vehicles:
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obnm/1AXAA00013
• Pry Bar http://1aau.to/oVe/1AXAA00020
• 10mm Socket http://1aau.to/obeA/1AXAA00017
• 12mm Socket http://1aau.to/obyQ/1AXAA00015
• 17mm Socket http://1aau.to/obyQ/1AXAA00015
• 19mm Socket http://1aau.to/oajB/1AXAA00043
• 21mm Socket http://1aau.to/oajB/1AXAA00043
• 35mm Socket http://1aau.to/oan/1AAST00005
• Brake Caliper Hanger http://1aau.to/ojf/1AXAA00439
• Pliers
• Side Cutters
• Ratchet http://1aau.to/obEf/1AXAA00016
• Socket Extensions http://1aau.to/obyQ/1AXAA00015
• Torque Wrench http://1aau.to/oaH8/1AXAA00044
• Drill Bit Set http://1aau.to/oay/1AXAA00141
• Gloves http://1aau.to/oadz/1AXSS00048
• Safety Glasses http://1aau.to/o6D/1AXAA00343
• Chisel http://1aau.to/okN/1AXAA00055
• Drain Pan http://1aau.to/oAy/1AXAA00320
• Floor Jack http://1aau.to/o73/1AXAA00068
• Hammer http://1aau.to/oVd/1AXAA00091
• Jack Stands http://1aau.to/oVE/1AXAA00065
• Punch
• Rubber Mallet http://1aau.to/og3/1AXAA00413
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.