How to Replace Front Wheel Bearing 2011-2016 Hyundai Elantra

Buy Now!
New Wheel Bearing from 1AAuto.com http://1aau.to/ia/TKAXX00102

This video shows you how to install a front wheel hub on your 2011-2016 Hyundai Elantra. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/of/1AXAA00013
• Impact Screwdriver http://1aau.to/oa/1AXAA00047
• Phillips Bit in a Ratchet http://1aau.to/oa/1AXAA00149
• Pry Bar http://1aau.to/of/1AXAA00020
• 17mm Wrench http://1aau.to/od/1AXAA00010
• 10mm Socket http://1aau.to/oe/1AXAA00017
• 12mm Socket http://1aau.to/om/1AXAA00015
• 17mm Socket http://1aau.to/om/1AXAA00015
• 19mm Socket http://1aau.to/oh/1AXAA00043
• 21mm Socket http://1aau.to/oh/1AXAA00043
• 30mm Socket
• 32mm Socket http://1aau.to/ob/1AAST00003
• Acetylene torch
• Brake Caliper Hanger http://1aau.to/oc/1AXAA00084
• Press
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• Snap Ring Pliers
• 1/2 Inch Air Impact Gun http://1aau.to/of/1AXAA00252
• Air Chisel http://1aau.to/oa/1AXAA00270
• Socket Extensions http://1aau.to/om/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oj/1AXAA00044
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• sanding disc
• Sandpaper
• Brass Punch
• Floor Jack http://1aau.to/of/1AXAA00068
• Hammer http://1aau.to/od/1AXAA00091
• Jack Stands http://1aau.to/of/1AXAA00065
• Large Hammer http://1aau.to/od/1AXAA00091

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.