Скачать или смотреть I 3D Printed My Own 5.0L Expandable/Stacking Mini-ITX SFF PC Case

Was looking for a case that would make a great NAS system, but wasn't finding anything SFF. Took what I learned from my open-frame case and made an expandable, stacking case.

Followup video on making new parts:    • Customizing Parts For 3D Printed Stacking ...  

Had a few goals in mind:

1) Printable on almost everything. This case is 185x185mm so anything with ~200mm bed will work.
2) Printable with no supports. Have done it with all my other cases so why stop now.
3) Able to hold any number of hard drives.
4) Should hold together without fasteners.
5) Stack the case in any order you want.

This case supports:

Mini-ITX MB
SFX-L PSU
Dual-slot GPU up to ~175mm in length (triple-slot cooler will work with riser pieces)
3.5in HDD
2x 2.5in SSD
4x 70mm Fan (or a single 140mm fan)

Any of these can be printed multiple times if you need more than one. No glue needed, though you may want to if you use multiple spacers.

Power Switch: https://ebay.us/zTCEuE
PCIe Riser: https://amzn.to/2ZSn7Qh
35mm M3 Standoffs: https://ebay.us/KbI5IW
Thumb Case Screws: https://ebay.us/t7G7DZ
CPU Cooler- Scythe Big Shuriken 3: https://ebay.us/KqV5xV

3D PRINTING SETTINGS
Default piece is 185x185mm. GPU extends 5mm for the mount.

Print with at least 20% infill, 3 parameters recommended. Parts print in 2 to 12 hours.

PETG recommended for components that produce a lot of heat (CPU, GPU).

STLs: https://cults3d.com/en/3d-model/gadge...