A Better Probe For Your Voron Switchwire | Magprobe HX

In this video, I will be showing you the step by step process for assembling the Magprobe HX, which is a DIY probe designed for Voron Switchwire based on salveoo's original Magprobe. Magprobe HX was designed for hot bed bed-mesh leveling, which is usually done when the printed bed is warped due to changing temperature cycles of the print bed.

Hello, fellow makers! Welcome to my channel where i post videos about DIY projects, tutorials and Howto clips.

⚡Links⚡
Magprobe HX: https://github.com/Kruze17/Magprobe-HX

Chapters:
0:00 Intro
0:55 Probe Options Comparison
1:50 Magprobe HX
2:04 Designing The Magprobe HX
3:08 Parts Assembly And Instructions
8:18 Probe Print Settings
8:53 Probe Assembly
9:38 Magprobe HX In Action
10:01 Like And Subscribe!

Be sure to subscribe to my channel if you like my content!

For more info on my projects you can check here :
Support me on Ko-fi: https://ko-fi.com/hypermakes2620
Instagram:   / hyper_makes  
Github: https://github.com/Kruze17
Instructables: https://www.instructables.com/member/...