How to Replace Rear Brakes 07-14 Ford Edge

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1ABFS02463

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2007-14 Ford Edge.

• Check here for more videos on the 2007-14 Ford Edge:    • Ford Edge 2007-2014 1st Gen  

This process should be similar on the following vehicles:
2007 Ford Edge
2008 Ford Edge
2009 Ford Edge
2010 Ford Edge
2011 Ford Edge
2012 Ford Edge
2013 Ford Edge
2014 Ford Edge

Tools you will need:
• Pocket Screwdriver
• Pry Bar http://1aau.to/oa/1AXAA00020
• 13mm Wrench http://1aau.to/oa/1AXAA00010
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Hose Pinch-Off Pliers
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• T40 Bit http://1aau.to/oa/1AXAA00008
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oa/1AXSS00035
• Copper Anti-Seize
• Gloves http://1aau.to/oa/1AXSS00048
• Safety Glasses http://1aau.to/oa/1AXAA00343
• sanding disc
• Sledge Hammer http://1aau.to/oa/1AXAA00091
• Wire Brush http://1aau.to/oa/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Ford Edge 2007-2014 1st Gen:    • Ford Edge 2007-2014 1st Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.