Скачать или смотреть HM-32 Mill Drill Hafco Metalmaster (M121)

http://www.machineryhouse.com.au/M121
HM-32 - Mill Drill - Belt Drive (240V)

Description
This is a rugged and well made machine with good capacities and plenty of power, a good choice for a serious home engineer.

The belt driven head provides a useful range of 12 speeds, 100-2150rpm and is quiet in operation, the head can be re-positioned on the column with the aid of a handle driven rack and pinion drive.

The table has T slots to allow the work to be directly mounting to table, or in a milling vice, with two large diameter control hand wheels with metric calibrations for the longitudinal axis.

The fine down feed control can be locked firmly in position when milling and the mill also features an easy-to-read depth stop.

Optional power feed provides smooth variable speed drive to longitudinal travel

Features
Quiet B section belt drive system
Milling head rotates 360º on column
Extra large 820 x 240mm ground work table with T-slots
Adjustable leadscrew nuts eliminating backlash on both axis
Fine feed hand wheel operating quill feed
Forward and reverse on/off switch with emergency stop
3MT spindle with 75mm diameter quill
Adjustable table and drill length stops
Rack and pinion wind-up head
Rear slide-way cover and slide clamps on all axis
Spindle lock for quill
Table locks on both axis
Metric dial graduations @ 0.05mm for X & Y axis
Optional power feed fits straight on the table

Includes
Drill chuck
3MT arbor
3MT-2MT drill sleeve
Face cutter & arbor
3" tilting vice
Safety cutter guard

ORDER CODE: M121
Model: HM-32
Digital Readout: Optional
Type: Vertical
Table Size: 820 x 240mm
Column Type: Ø115mm
Spindle Taper - Vertical: 3MT
Longitudinal Travel (X-Axis): 540mm
Cross Travel (Y-Axis): 190mm
Vertical Travel (Z-Axis): 410mm
Type of Slides: Dovetail
Spindle to Table: 455mm
Quill Travel / Diameter: 130mm / 75mm
Throat Depth (max.): 202mm
Tilting Head (Left ~ Right): Fixed
Tilting Head (Forward ~ Back): Fixed
Drilling Capacity: 31.5mm
End Milling Capacity: 22mm
Face Milling Capacity: 80mm
Power Feed - Longitudinal (X-Axis): Optional
Table T-Slot Size: 14mm
Work Table Load Capacity: 50kg
Spindle Speeds Vertical (steps/rpm): 12 (100-2150rpm)
Motor Power - Vertical: 1.5kW / 2hp
Motor Voltage: 240V
Overall Height: 1100mm
Weight (nett): 295kg


For more information on this machine, please visit:

Hare and Forbes Machineryhouse
Sydney: (02) 9890 9111
Melbourne: (03) 9212 4422
Brisbane: (07) 3715 2200
Perth: (08) 9373 9999
http://www.machineryhouse.com.au/M121

Machineryhouse - NZ
Auckland: (09) 2717 234
http://www.machineryhouse.co.nz/M121