Porting How to -- Polishing cylinder head combustion chambers

Описание к видео Porting How to -- Polishing cylinder head combustion chambers

This was my first time polishing combustion chambers. The heads are cast iron small block Ford heads made by World Products (Windsor SR heads). I show how I used a carbide burr to take the cast finish off, then followed that up with a sanding disk and buffing wheel. I also show the results of opening the intake ports to match the gasket size (Fel Pro 1262).

My other videos on these heads:
After valve job and bowl blend:    • Ford / World Products Windsor Sr Head...  
Port match:    • Port Match / Ford 351W / #BackyardPor...  
New flow numbers after porting:    • Amateur Head Porting Results  

Комментарии

Информация по комментариям в разработке

Похожие видео