Скачать или смотреть Full Build Guide PS Placeable: PSP 3000 models

(Update - a quick silly oversight by me is how the system is turned off. You turn it on by connecting a controller and then you turn it off be powering off your controller. Then simply turn that same controller on to wake the console like you would any other PlayStation console. )

Hello everyone! This has been a work in progress. I wanted to get as much information packed in as possible, but also not take so long that this video never came out.

There is more information to share, I will be adding that to the link below

FAQ - https://www.retromodworks.com/faq

Also the web app for custom button mappings and firmware can be found below. Its best to use them on a chrome browser

Web App - https://ste2425.github.io/PSP-Bluetooth/

The rest of the files and information on the project can be found on Stephens Github page. Thank you Stephen so much for all your hard work!

Github - https://github.com/ste2425/PSP-Bluetooth

I will post time stamps for the full video so you can skip around as needed, but please watch the video all the way through. It can be easy to make mistakes and break things. Please be careful.


0:00 - Intro
2:31 - TEST your devices!
3:40 - Kit Contents
5:04 - Remove Extra Plastic
6:25 - Place Magnets In top
7:25 - PSP Disassembly
8:35 - Check If You Have A TA-095 or Not
10:56 - Place Trigger Brackets Back in Place
11:25 - Cut Shell
11:45 - Cut and Splice Power cable
12:46 - Ribbon Cables For Non TA095 Boards
13:36 - Ribbon Cables If You Have A TA095
14:14 - Solder Guide
15:46 - BT Mod Board Firmware
17:50 - Mod Board Settings
18:43 - Begin Assembly
19:07 - Connecting Ribbons To PSP
20:34 - Power On The PS Placeable
20:50 - Test All Buttons Before Assembly
21:35 - Remove Base Peg
22:11 - Screw Power Cable In Place
22:40 - Tuck Cables and Fold PSP Into Place
23:52 - Place Middle Shell and LED
25:09 - Screwing Base To Middle Shell
26:12 - Fully Assembled
27:20 - Squeaky UMD Drive
28:45 - Place Rubber Feet On Base
29:32 - Outro (Custom Katamari Button mapping)


Thank you so much for watching this video and building the PS Placable. I hope you enjoy the guide and it helps you put your together. This has been a really fun project and I want to make sure everyone enjoys their builds. Happy gaming!


A quick liability statement. I am not responsible for your device or any mistakes or damages you may cause to your devices or person. Please be careful and use all proper precautions if you are attempting to do this build. I am not an expert and am just showing you how I assemble these.