Problems on Angle Gauge Set | How to Use Angle Gauges | Metrology and Instrumentation | Shubham Kola

Subject - Metrology and Quality Control

Chapter - How to Solve Problems on Angle Gauges

Timestamps
0:00 - Start
0:08 - How to Solve Problems on Angle Gauges
0:14 - What is the Use of Angle Gauge
0:32 - Problem 1: Construct an Angle 29 degree 12 minutes and 3 seconds using standard angle gauge set
1:49 - Problem 2: Built an Angle 139 degree 33 minutes and 30 seconds using standard angle gauge set

#Angle_Gauges
#Problems_on_Angle_Gauges
#Metrology
#Mechanical_Engineering
#shubhamkola

This Video Topic is from Metrology and Quality Control Subject, you can also watch below mentioned videos related to Metrology and Quality Control Subject:
Dial Gauge Indicator (Mechanical Comparator) -    • Dial Gauge Indicator Working | Mechan...  
Sigma Comparator (Mechanical Comparator) -    • Sigma Comparator Working | Mechanical...  
Solex Pneumatic Comparator -    • Solex Pneumatic Comparator Working Pr...  
Sine Bar (Angular Measurement) -    • Sine Bar Working Procedure | Angular ...  
Bevel Protractor (Angular Measurement) -    • Bevel Protractor Working | Angular Me...  
Clinometer (Angular Measurement) -    • Clinometer Working | Angular Measurem...  
Autocollimator (Angular Measurement) -    • Autocollimator Working | Angular Meas...  
Profile Projector (Optical Comparator) -    • Profile Projector Working | Optical C...  
Floating Carriage Micrometer (Screw Thread Measurement) -    • Floating Carriage Micrometer Working ...  
Screw Thread Terminology (Flank, Pitch, Root, Crest) -    • Screw Thread Terminology | Flank, Pit...  
Types of Screw Thread (V Thread, Acme Thread, Buttress Thread) -    • Types of Screw Thread | V Thread, Acm...  
Two Wire Method (Derivation of Effective Diameter for Thread Measurement) -    • Two Wire Method: Derivation of Effect...  
Three Wire Method (Derivation of Effective Diameter for Thread Measurement) -    • Three Wire Method: Derivation of Effe...  
Best Wire Size (Screw Thread Measurement) -    • Best Wire Size in Screw Thread Measur...  
Parkinson Gear Tester (Gear Inspection) -    • Parkinson Gear Tester: Construction a...  
Gear Tooth Vernier Caliper (Gear Tooth Thickness Measurement) -    • Gear Tooth Vernier Caliper Working | ...  
Limit, Fit, Allowance and Tolerance -    • Limit, Fit, Allowance & Tolerance | H...  
Hole Basis System and Shaft Basis System -    • Difference Between Hole Basis System ...  
How to Solve Problems on Slip Gauge Set M87 and M45 -    • Problems on Slip Gauge Set M87 and M4...  
How to Solve Problems on Angle Gauge Set -    • Problems on Angle Gauge Set | How to ...  

Your Queries :-
What is Angle Gauge
How to Use Angle Gauges
How to Set Angle Gauges
How to Solve Problems on Angle Gauges

Faculty - Shubham Kola ( BE Mechanical Engineer )
Email ID - [email protected]
From - Maharashtra ( India )
YouTube Channel ( Shubham Kola ) -    / @ifinfotech  

Disclaimer -

video is for educational purpose only. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use. The content in this video is collected from books, media, internet space etc. This is strictly for educational and information purposes and is not intended to be advice or recommendation of any kind whatsoever. The faculty is not a subject expert. The faculty is sharing his knowledge in the form of videos. The faculty giving small basics information on mechanical engineering topics. We endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the video or the information, related graphics contained in the video for any purpose. any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arise out of, or in connection with, the use of this video.

(*The music used in my video, is not owned by me!*
Source*YouTube Music Library)