How to restore and repair Apple iWatch S1 / S2 / S3 with red exclamation mark !

Unfortunately, Apple has made it difficult for users to restore Apple Watch so you’ll need to schedule an appointment at your nearest Apple Store in case something goes awry with the watchOS software that couldn’t be resolved by resetting to factory settings.
iBus dongle lets you connect any Apple Watch via the standard Lightning cable to iTunes on your Mac or Windows PC, allowing you to perform a full restore.

In order to restore software on your Apple Watch from a firmware file on your computer, or downgrade to an older firmware, you’ll need to put the device in DFU mode.

1) Remove the strap on the button side of your Apple Watch case.

2) Place the sewing needle in the port hole. Don’t press the needle to access that door like you would when opening the SIM card tray on your iPhone: instead, apply light downward pressure while pole-vaulting the needle to the side in order to pop the cover off the port.

3) Now connect your iBUS dongle to the watch’s diagnostics port.

4) Connect a Lightning cable to the other end of the dongle and the other end of the cable to your computer’s USB port, then launch iTunes.

5) Turn on your Apple Watch and wait until it boots.

6) Press and hold both the Digital Crown and the Side button for ten seconds, then release the Side button while still holding the Digital Crown until iTunes greets you with a message confirming your Apple Watch is in DFU mode.

Not unlike putting your iPhone, iPad or iPod touch in DFU mode, you will be asked to select a watchOS firmware file (.IPSW) for restore.

This USB 2.0 iBus adapter connects your iWatch S0 & S1 (38mm & 42mm) with Lightning usb cable to your computer’s USB port for restore & upgrade and repair software etc. It also can fix related issues once iwatch glass digitizer touch got replacement. E.g. if your Apple Watch displays a red exclamation mark after software update, that can be easily solved by iBus, no need to contact Apple Support for service.

Buy iBUS S1: https://www.cellcorner.com/xshp/unloc...
Full Support Apple Watch 38mm & 42mm

Apple Watch Series 0 (1st Generation) 38 mm (A1553 N27aAP), 42 mm (A1554 N28aAP)
Apple Watch Series 1 38 mm (A1802 N27dAP), 42 mm (A1803 N28dAP)

Buy iBus S2: https://www.cellcorner.com/xshp/unloc...
Full Support Apple Watch 38mm & 42mm

Apple Watch Series 2 38 mm (A1757/A1816 N74ap), 42 mm (A1758/A1817 N75ap )
Apple Watch Series 3 38 mm (N111sAP/N121sAP), 42 mm (N111bAP N121bAP )

Follow us:

Online store: https://www.cellcorner.com
Facebook:   / cellcorner  
Twitter:   / cellcorner