Adding constant power to rear of 5th Gen 4Runner

In this video, I demonstrate how I installed a constant, controllable source of 12v power to the back of my 2020 4Runner TRD Pro.

Both of the factory AC and DC plugs that Toyota provides to the rear of the vehicle are only powered when the engine is running or if the vehicle is in accessory mode. I wanted a solution that allowed me to control when the power is on or off and also provides protection from accidental excessive discharge of my battery. I chose to wire my aftermarket rear power source to my Switch-Pros 9100 as it allows me to control when the power is on, either through the touchpad on my dash or using the Switch-Pros app on my phone. The Switch-Pros 9100 also has protection for accidental excessive battery discharge.

Parts used:
Blue Sea Systems 4366 Panel Acc H2O USB SCKT & VMETER: https://www.amazon.com/dp/B07PP1V3L5?...
GS Power 100% Copper 10 AWG (American Wire Gauge) OFC Wire. 25 FT: https://www.amazon.com/dp/B0796JJHTQ?...
Switch Pros SP-9100: https://www.amazon.com/gp/product/B07...
Finn Fab 5th Gen 4Runner Rear Window Molle Panels: https://yotamafia.com/product/5th-gen...

Begin Disclaimer
This video is for demonstration purposes only. It is me demonstrating how I performed this modification. I make no warranties, nor do I take any responsibility for damage to your vehicle. Always seek advise or assistance from a trained professional.
End Disclaimer