Harbor Freight Greenhouse Build

This is the things we figured out when we built this 10 x 12 green house kit from Harbor Freight https://www.harborfreight.com/10-ft-x...
The kit with the spacers and the door slides that I still need to go back and install came from https://thirtyonecrafts.com/ (He contacted me and told me that many variants of the door have been made over the years and he has different pieces available, it could be benificial to contact him and let him know which part you have for the door slide so he can advise you on the proper piece.)
this is his video where I found his kit info ahd helpfull hints to build this greenhouse    • 2020-24 -How to build Harbor Freight ...  

The thing I would stress the most is to start with a solid level and square base assembly, and read the directions and follow them.

I am quite happy with the quality and how sturdy it is with the few modifications from the 31 crafts company and the 3M Foil Tape General Purpose HVAC Tape that most hardware stores have, Walmart has Duck brand tape however the backing is not as easy to take off but it still works fine. We used about 2 rolls. The screws I used came from Ace hardware Hillman No. 8 X 3/4 in. L Slotted Hex Washer Head Sheet Metal Screws 100 pk https://www.acehardware.com/departmen...

The washers are Hillman Zinc-Plated Steel 1/4 in. Bonded Neoprene Washer 100 pk https://www.acehardware.com/departmen...

The screws in base plate of the door and around the base below each window plastic to hold the aluminum more securly to the baseplate are Teks No. 8 X 1/2 in. L Phillips Truss Head I used maybe 25 or 30 and can be purchased individually or in a box of variong amounts https://www.acehardware.com/departmen...

A tall lader is very important to have access to when doing the top portion.
Becarefull and enjoy.
I am impressed with the quality of this greenhouse.