Скачать или смотреть etrailer | Review of SnapPad RV Jack Pads - XTRA XL Plus Jack Pads 9 And 12 Inch Feet - SP54FR74

Click for more info and reviews of this SnapPad RV Jack Pads:
https://www.etrailer.com/RV-Jack-Pads...
Check out some similar RV Jack Pads options:
https://www.etrailer.com/dept-pg-RV_J...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Snap...
Hi everybody. Andy here with etrailer.com and today we're going to take a look at the SnapPad Xtra XL Jack Pads. These heavy duty rubber pads are going to snap onto your class A motor homes Lippert leveling jacks to make leveling faster and easier, eliminating the need to crawl under your motor home to position plastic pads or wood blocks. These four pads are designed once again to fit your class A motor homes with the Lippert Leveling Systems with two nine inch in diameter and two 12 inch in diameter round jack feet. Now while I have this nine inch foot up here, let me just give you some overall measurements here of the base. So as you can see, this is 11 inches wide and it's right at about two inches tall.

And then for the bigger one here, let me get my tape measure, line this up here for you. Let's see if I can line up our tape measure here. So the diameter of this pad, as you can see, we're sitting right at 13 and seven eight inches across. (tape retracting) Laying this down here. Let me retrieve my ruler.

And right about here, we're sitting right about two and a quarter inches tall. Now it is a good idea to measure your jacks to confirm compatibility as the foot size and shape of the jacks on your leveling system can vary from model to model and year to year. The increased surface area of your leveling jacks feet is going to give you added support for your trailer preventing sinking into soft ground, unlike those smaller metal feet. So these pads are made here in the USA of durable, heavy duty rubber and the the rubbers made actually from recycled tires. So they are going to grip uneven terrain and prevent your metal feet from rusting or bending.

The built-in drains are going to release moisture to prevent your jack feet from rusting and corroding. And they're also going to serve as a cushion so your metal feet won't crack or chip your driveway. And they're going to help dampen vibration from inside your motor home that could cause shifting. There's not going to be any need to remove and replace these pads or carry other jack pads or blocks around with you. So these are going going to be a simple, one-time installation.

You're just going to line up the pads beneath your jack feet and lower each foot until the lip on the pad fully engages and locks in place. You're actually going to hear a snapping sound once that pad is securely installed. Now insulation is permanent, so once you have the snap pad secured you're never going to have to worry about crawling under your RV to place pads again. Well, that's going to conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.