You should be using Cura's experimental "slicing tolerance" setting - let me explain why.

Print in place parts, screw threads, all these kind of things tend to print with too little tolerance and you end up with an unusable part. Well, ONE of the reasons for this, and also one of the solutions for it, is to change slicing tolerance.

Watch to find out why.

For more information about how cura actually works out its slice geometry (something I admittedly skimmed over by assuming everything was a circle!) see these:
https://github.com/Ultimaker/CuraEngi...
https://support.ultimaker.com/hc/en-u...



*** Please consider supporting the channel to allow me to do more, and better stuff! ***
  / lostintech  

Join us on Discord! There are many of us now! Hundreds! (okay, one hundreds but that's still a quantity of hundreds!)   / discord  

Waste: 148g / PLA
https://www.lostintech.co.uk/waste/


Models used:
https://www.prusaprinters.org/prints/...
https://www.prusaprinters.org/prints/...

Odyssey by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song...
License: https://filmmusic.io/standard-license