How to Replace CV Joint Boot Kit 2003-2009 Toyota 4Runner

Buy Now!
New CV Joint Boot Kit from 1AAuto.com http://1aau.to/ia/TYAXX00002

This video shows you how to install a TRQ CV joint boot kit on your 2003-2009 Toyota 4Runner. The CV joint boot protects the joints in your CV axle from water, dust, dirt and other road debris. If the boot has worn, torn, or been punctured, you risk damaging the joints in the axle. This kit includes new boots, clamps, and grease so you can refresh both ends of the front CV axle in your Toyota 4Runner.

This process should be similar on the following vehicles:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 36mm Socket http://1aau.to/oa/1AAST00006
• Snap Ring Pliers
• Straight Cutters
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Gear Oil
• 10mm Allen Wrench http://1aau.to/oa/1AXAA00007
• Center Punch http://1aau.to/oa/1AXAA00055
• Drain Pan http://1aau.to/oa/1AXAA00320
• Hammer http://1aau.to/oa/1AXAA00091

Subscribe:    / @trq  

Check out our playlist:
Toyota 4Runner 2002-2009 4th Gen:    • Toyota 4Runner 2002-2009 4th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.