How to Replace Front Lower Ball Joint 2004-08 Ford F150

Buy Now!
New Ball Joint from 1AAuto.com https://trq.video/ia-1ASBJ00184
New Ball Joint Set from 1AAuto.com https://trq.video/ib-1ASFK01285

Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 2004-2008 Ford F150.

• Check here for more videos on the 2004-08 Ford F-150:    • Ford F-150 2004-08 11th Generation  

This repair was done on a 2005 Ford F-150 XL 4.2L Standard Cab Pickup 2-Door and the process should be similar on the following vehicles:
2004 Ford F-150
2005 Ford F-150
2006 Ford F-150
2007 Ford F-150
2008 Ford F-150

Tools you will need:
• Pocket Screwdriver
• Pry Bar https://trq.video/oCW-1AXAA00020
• 22mm Socket https://trq.video/oit-1AXAA00266
• Ball Joint Press
• Large Locking Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun https://trq.video/okB-1AXAA00252
• Socket Driver
• Socket Extensions https://trq.video/oaKK-1AXAA00015
• Torque Wrench https://trq.video/o9Z-1AXAA00044
• Bungee Cord
• Paper Towels https://trq.video/otg-1AXSS00035
• Floor Jack https://trq.video/oIS-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oGm-1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ford F-150 2004-08 11th Generation:    • Ford F-150 2004-08 11th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.