Radiomaster Boxer + TBS915MHz +DJI O3 Airunit Freestyle FPV

​ @RadioMasterRC
RadioMaster BOXER remote control, full size, V4.0 Hall rocker, brand new shoulder buttons - SE self-locking switch and SF self-resetting switch, the first soft handle.
Available in three optional configurations: ExpressLRS / 4-in-1 / CC2500
Using STM32VGT6 chip, memory 1MB
Support EDGETX open source operating system
The refresh rate of the ELRS version is adjustable, and the highest support is F-1000Hz
The output power of the ELRS version is adjustable, the FCC version can reach a maximum of 30dBm, and the EU LBT version can reach a maximum of 20dBm
4IN1 version / CC2500 version output power up to 20dBm
Support QC3.0 fast charge, support 2S, maximum support 2.0A current
With a large battery compartment, the battery life is more powerful. It supports a maximum of 6200mAh 2S battery, and the battery life is up to 20 hours, which solves power anxiety (the battery is not included in the factory)
The standard configuration is a full-size V4.0 Hall rocker, which can be freely upgraded to the AG01 CNC metal Hall rocker
Using standard JR external tuner interface
Built-in cooling fan, LUA controllable (ExpressLRS version only)
6-way switch design, flight mode can be changed at will
Detachable T-shaped antenna
soft lift
Built-in SD card slot
The power supply port is reserved on the battery back cover



technical parameter
Product model: BOXER remote control
Specification size: 178*76.7*235mm
Weight: 532.5g
Transmission frequency: 2.400GHz-2.480GHz
Internal RF Options: CC2500 Multiprotocol / 4-in-1 Multiprotocol / ELRS 2.4GHz
RF power: CC2500 /4-in-1: 20dBm max, ELRS: 30dBm max
Cooling fan: Built-in cooling fan (ExpressLRS version only)
Working voltage: 6.6-8.4V DC
Open source firmware: EdgeTX (remote control)/DIY-Multiprotocol-TX-Module (high frequency module)/ELRS
Number of channels: up to 16 channels (depending on the receiver)
Display: 128*64 monochrome LCD display
Joystick: V4.0 Hall joystick
External module: JR/FrSKY compatible module socket
Upgrade method: support USB online/SD card offline upgrade
Protocols: All protocols supported by Multiprotocol (for a list of protocols supported by Multiprotocol, visit

https://github.com/pascallanger/DIY-M...)

packing list

1 * BOXER remote control
1 * Carrying case
1 * T-type antenna
1 * USB-C data cable
1 * Joystick Protective Cover
1 * 1.5mm hex screwdriver
2 * M4*4 screws
4 * spare soft springs