User Tips Malem Wireless

This video includes some tips for using your Malem Wireless Bedwetting Alarms. The tips are also delineated below:

User Tip #1: How to Make Sure Your Malem Wireless Transmitter and Receiver are paired.

The Malem Wireless transmitter and receiver will communicate wirelessly when "paired". Your Malem Wireless will already be paired when you receive it. In the video we show you how to test your Malem Wireless to make sure the Transmitter and Receiver are paired.

Below are the steps, brought to you by the Bedwetting Store:

Turn on the receiver.

The red LED light will blink intermittently when the receiver is on.

With nothing between the sensor’s “mouth”, put the sensor clip down

The receiver should sound if paired.

If the receiver does not sound, follow instructions for pairing (link to pairing video)

Replace the batteries in receiver if it still does not sound.

User Tip #2: Don't Leave the EasyClip Down.

Leaving the clip down drains the battery as this prompts the transmitter to communicate with the receiver. If the receiver is turned off, the transmitter will continue trying to communicate, thus draining its battery.

To avoid this either leave the clip up…

Or close the clip with a small strip of paper in the “mouth” to prevent the connection.


For more care tips and how-to’s, visit BedwettingStore.com

http://bedwettingstore.com/bedwetting...

http://bedwettingstore.com/malem-wire...

   • User Tips   Malem Wireless