Faux Wood Grain On PVC Pipe

Cosplayers & Prop Builders, this is a detailed demo on creating a realistic hardwood faux finish on a PVC Pipe.
------
Step 1: Sand PVC with 120 grit sandpaper until all lettering has come off.

Step 2: Sand PVC with 60 grit sandpaper stick. Long firm strokes to cut deeper grooves into the PVC.

*Note: All sanding strokes must be done in straight lines parallel to the pipe (no circular or zig-zag strokes).

Step 3: Hand finishing sanding pad to get rid of PVC hairs.

Step 4: Rub on dark brown acrylic paint to fill in the deeper grooves. Let dry thoroughly.

Step 5: Rub on a think coat of burnt sienna to create a richer feel.

Step 6: Brag :-)

--------------------
I got my paint supplies from:
https://www.jerrysartarama.com, or https://www.dickblick.com
• Liquitex Soft Body Acrylics
• Liquitex Slow-Dri Fluid Retarder


------------------------------------- Exterior Use -------------------------------------
I've been asked several times about what to use for outdoor applications. When things are expose to the weather very few man-made things hold up well over time. Baked on enamels do the best, but that's not an option for PVC pipes. The steps below is the best advise I can give for exterior use.

1) After sanding pipe, and getting rid of all smooth surfaces, clean well with a PVC degreaser like acetone.
2) Use an exterior stain made for metal and plastic
3) For a final clear coat I recommend using Golden's MSA Varnish with UV protection.
https://goldenpaints.com/technicalinf...

Depending on where you live the wood finish may last 1-8 years before pealing.