Скачать или смотреть Automated Beam Precast Reinforcement in Allplan - ALLTO Precast PythonParts [Full Features]

ALLTO PythonParts for precast concrete building
1. General tab 0:00
▪️ Select geometry of beam ➡️ Define dimension for beam ➡️ Select recess shape and define dimension. ➡️ define advanced parameters.
▪️ Creating normal reinforcement or PythonPart element.
▪️ Concrete cover can be defined separately or the same for each side of the beam.
▪️ You also can preview the rebars.
▪️ Select positioning axis: inside, center or outside ➡️ Select 2 points to create reinforcement.
2. Rebar tab 1:32
▪️ Define main rebars for beam
▪️ Define parameters: Type, diameter, quantity, custom distance.
3. Stirrup shape 3:27
▪️ Define parameters for stirrup: Type, diameter, vertical offset.
▪️ Pick and draw stirrup shape. ➡️ We have ability to define parameters for stirrup after drawing
4. Stirrup spacing 4:47
▪️ Select stirrup position and define spacing for each of them. ➡️ Define spacing and length for each placement.
5. Additional rebar 6:06
▪️ Vertical Pin
▪️ Horizontal Pin
▪️ Close stirrup
▪️ Oblique rebar
[Get Free Trial] alltosoftware.com/beam-precast-pythonparts

As Allplan Partner Solution, with ALLTO PYTHONPARTS, you can maximise the value of your Allplan software.
---
🌐: alltosoftware.com
📩: [email protected]
🧑🏽‍💻: [email protected]

#beam #precast #pythonparts