Building this

I had a ton of fun making this little fridge, and I learned a lot from the experience! Here are the cutting instructions for this project:

Piece Quantity Imperial Metric Name

Cut from ¼” Foam board
A 2 2” x 5 ¼” 51mm x 133mm Back/Door
B 2 1 11/16” x 4 ⅞” 43mm x 124mm Sides
C 2 1 11/16 x 2” 43mm x 51mm Top/Bottom
D 1 1 29/32” x 1 21/32” 49mm x 43mm Base

Cut from Plastic canvas
E 2 1 ⅝” x 1 ⅝” 41mm x 41mm Shelves

Cut from 3/32” (2.5mm) thick wood
F 1 1 ⅝” x 1 ½” 41mm x 38mm Freezer bottom
H 1 1 ⅝” x 5/32” 41mm x 4mm Freezer Latch
I 1 1 21/32” x 1 9/16” 42mm x 39mm Crisper shelf

Cut from 1/16” (1.5mm) thick wood
G 1 1 ⅝” x 1 3/16” 41mm x30mm Freezer door

Markings for one of Piece A - From the top
35mm, 55mm, 80mm

Markings for both of Piece B - From the top
30mm, 50mm, 75mm

Additional materials
Silver vinyl or shelf liner
10 magnets (3mm x 1mm)
5 Craft match stick
Single serving condiment pack
Clip from a pen
Paint: Gray, white, Metallic Silver
Glossy Mod Podge
Thin strip of white cotton material
White paper