Скачать или смотреть How To Install v6 Frog Cube Conversion Kit 20L (Detailed Instructions and Shopping List!)

✅ Subscribe for more free terrarium and plant videos!
http://bit.ly/awt-yt-subscribe

#terrarium #frogcube #diy

🍂 IN THIS VIDEO

How To Install v6 Frog Cube Conversion Kit 20L to convert your horizontal Aqueon tank into a vertical terrarium with a swinging glass door.

Complete list of all tools and materials needed (in video and also in description below)

Detailed instructions and demonstration

Official Frog Cube site: https://frogcube.com/

🍂 HERE'S WHAT YOU'LL NEED:

The Frog Cube Conversion Kit - they sell various designs and sizes, so make sure to order the correct kit for your tank and your project goals. I'll be using 20H Vertical v6.6 Hinged.

The Aqueon tank - in this case, a 20 gallon Long

Glass panels cut to size. I bought my glass at Lowes Home Improvement, and they cut it for me. The glass should be 3/32" thick. For the 20 Long conversion, the glass dimensions are as follows: DOOR should be: 22" x 11-1/4" and BASE should be: 4-7/8" x 11-3/4"

Aquarium-Safe Silicone for installing and waterproofing the base glass. I'd recommend using a small tube instead of a caulking gun since you need to be able to reach the inside of the tank, which is kind of a tight space

Wide masking tape to prevent excess silicone mess on the glass. This is optional but advisable to reduce the amount of clean-up work needed later

Isopropyl alcohol for cleaning the glass

Paper towels

X-acto Knife or razor blade for prepping the tank and removing excess silicone

Wet/Dry sandpaper for the glass. I used CW-220 grit

Sanding block to make the sanding more even and protect your hand

Container with water for wetting the sandpaper

Two towels - one for protecting the glass on the work surface, and one for protecting your hand that holds the glass

Somewhere you can work on the wet sanding, such as a large plastic sheet


🍂 RECOMMENDED SAFETY EQUIPMENT

Goggles to protect your eyes when sanding the glass

Nitrile or Rubber Gloves for handling silicone

Respirator to prevent inhaling fumes from the silicone


🍂 RECOMMENDED PLAYLISTS

‣ How I Built a Drip Wall Tank - http://bit.ly/awt-yt-drip-wall-pl
‣ Unboxings - http://bit.ly/awt-yt-unboxings
‣ Tutorials - http://bit.ly/awt-yt-tutorials

🍂 MORE!

❤ Please Like & Share if you enjoyed the video. Thanks!

🍂 Copyright Matthew Schwartz | Another World Terraria