Скачать или смотреть How to Mould and Paint Dinosaur

How to buy this mould and paint dinosaur:
1. Order online through

https://www.amazon.com/4m-Mould-Paint...

Or

2. Go to any Toy kingdom near you

What the box includes:

Paint
Paint brush
Cavities
Manual
2 bags of Plaster
Glow in the dark paint

Instructions
1. MIXING THE PLASTER
Your project may contain more than 1 bag of plaster powder (100g/3.5oz).

The follows ng instructions are for mixing ONE bag of plaster at a time.

Prepare a mixing Bowl and a glass of water of approximately 50-70ml. Cut open the bag of plaster powder and post in into the mixing Bowl. Start adding water.

Watch the condition of the plaster paste and add water bit by bit.

Do not pour too much water in at once as That may make the plaster mixture too runny for moulding.

Stir the mixture gently while you are pouring water.

2. MOULDING

Pour the plaster mixture inyo the cavities.

3. LEAVE THE PLASTER TO SET

Wait for 1 hour for the plaster to Set. Prepare a piece of soft cloth on the table. Once the plaster has fully hardened, gently press the mould from behind so the hardened plaster releases onto the cloth prepared.

4. PAINTING

Use your own color scheme or refer to the illustratikns as shown on the package for ideas.

Green= yellow + Blue
Orange= yellow + red
Purple= Blue + red
Turquoise= Blue + white + a little yellow
Pink= white + red
Sky Blue= white + Blue
Like green = yellow + a little Blue
Brown = yellow + red + a little black

IF GLOW PAINT IS INCLUDED IN YOUR KIT:
After the moulded pieces have been painted with the original colours, highlight some details with the glow paint.

5. APPLYING MAGNETS

Wait until the plaster has fully hardened and is comepletely dry. Cut the magnet strip inyo pieces.

Peel off the ba kung and stick firmly onto the back of the hardened plaster.