R107 Mercedes M110 engine - reinstalling thermostat, water pump, harmonic balancer+torque specs

This is a detailed video, showing how to install the thermostat housing, water pump housing and harmonic balancer onto to the Mercedes M110 engine in our 1975 R107 280SL. The video shows what sealant and gaskets to use, what lubricants to use, and the various torque specs. To ensure no rust in the future, all the hose clamps and hardware have been replaced with the correct rated stainless steel fittings. Here are the sizes of the nuts, bolts, washers and screws:

Thermostat housing to engine block bolts (x3) M8 x 70mm Plain Hexagon Bolts (DIN 931)(A2)
Thermostat housing washers (x3) 8mm x 16mm Medium Flat Pin Washers (DIN 1440)(A2)
Thermostat lid to thermostat housing (x2) M6 x 20mm Full Thread Hexagon Bolts (DIN 933)(A2)
Thermostat lid to thermostat housing (x1) M6 x 40mm Full Thread Hexagon Bolts (DIN 933)(A2)

Water pump housing to engine block bolts (x5) M8 x 40mm Plain Hexagon Bolts (DIN 931)(A2)
Water pump housing to engine block washers (x5) - Used originals
Water pump to water pump housing bolts M6 x 16mm Full Thread Hexagon Bolts (DIN 933)(A2)
Water pump pulley to Water pump - Used originals

Harmonic balancer (crank shaft pulley) (x6) M8 x 65mm Cap Head Screws (DIN 912)(A2)
Harmonic balancer (crank shaft pulley) (x6) M8 Spring Washers (DIN 137A)(A1)

AirCon rad to frame (top bolts) (x2) - M6 x 16mm Full Thread Hexagon Bolts (DIN 933) (A2)
AirCon rad to frame (bottom screws) (x2) - No.14 (6.3mm) x 3/4 inch (19mm) Self Tapping Hex Bolts (DIN 7976C)
AirCon rad brackets to frame bolts (x4) - M5 x 14mm Full Thread Hexagon Bolts (DIN 933)(A2)
AirCon rad brackets to frame washers (x4) - M5 Square Profile Spring Washers (DIN 7980) (A4)

All hardware purchased form http://www.accu.co.uk

Total £21.93+vat (£26.32)