How to: Replace power steering pump and flush PS fluid (Ford, Duratec HE, Mondeo)

Removing and refitting a power steering pump, and flushing power steering fluid, on a Ford Duratec HE. This is Mondeo but the principle will apply generally.

If you want to drain the fluid using the drain pipe at the steering rack, or disconnect the lines at the rack, see this later video:
   • How to: Ford power steering fluid flu...  

You will need:

* Jack & axle stands
* Socket set with ratchet & bar
* Quality flare nut spanner for the 18 mm hex line union fitting
* Pulley puller if removing the pulley
* Torque wrench
* Vice grips
* PTFE O-ring seal, Ford # 3518119 (required)
* Replacement O-rings for the reservoir (if old ones damaged)
* Power steering fluid, originally to Ford specification M2C195-A (old)...
Amazon UK: https://amzn.to/2RSCeWB
...superseded by M2C204-A2 (new)...
Amazon UK: https://amzn.to/2QsyVsr
Or, follow the Ford TSB (07-1-7) and use Mercon V...
Amazon US: https://amzn.to/2Bre2U8 | UK: https://amzn.to/2SeBoni
** Warning! Some fluid product listings online are listing Ford spec M2C938-A as a replacement for M2C195-A. That is Mercon LV ATF and I'm fairly sure it's an error.
* A fluid pump of some sort to extract fluid from the tank before removing its hose.
* Rags to soak up spilled fluid.
* A container in which to catch old fluid.
* Container in which to dispose of old fluid.
* Funnel.

FordTechMakuloco's video on installing the high pressure line union PTFE seal:    • Ford Power Steering Teflon Seal Insta...  

(Using the above Amazon links helps support my channel and is appreciated!)