Brand new Polaris Pro XP (or any model for that matter) - Should you grease the bearings?

On today's video, we have a brand new (2020) Polaris Pro XP. I'm going to grease the bearings to see exactly how much grease is in there from new, and show you how you can do the same.

I would recommend doing this on all new SxS's, especially if you will be driving them in wet conditions. This is pretty much the same procedure for the Turbo's, 1000's, and 900's - anything with a 44mm bearing. The only difference is that you don't need to remove any of the hub bolts for the smaller machines.

44mm Grease Tool - https://www.amazon.com/iFJF-Bearing-G...











Disclaimer - this video is for entertainment and informational purposes only. Do not attempt. Attempts to recreate, reproduce, or replicate anything seen in this video is done at your own risk. As with any product, it should only be serviced by the manufacturer or a licensed professional. Tampering with your product may void your warranty. Video owner shall not be held responsible if you void your warranty. The video owner will not be liable for any damage or injury incurred by anyone to anything while trying follow the steps in this video. Any and all liability to any part for any direct, indirect, implied, punitive, special, incidental, or consequential damages arising directly or indirectly from any use of the video content is hereby disclaimed. No guarantees or warranties are either implied or expressed that you will have the same results as shown in this video.