Injector Sleeve Installation And Removal - Volvo D13 Engine

Available subtitles in Indonesian and English.


Tutorial for Injector Sleeve Installation and Removal - Volvo D13 Engine


The injector sleeve is mounted on the cylinder head and functions as the seat of the injector, on the side of the injector sleeve is cooling water that functions to cool the injector or commonly called "WATER JACKET".
Injector sleeve replacement is done because there is a problem in the injector, so when the injector is removed then the injector sleeve is also replaced because the o-ring from the injector sleeve is also damaged.

The following is a tutorial on how to remove and install the injector sleeve on the VOLVO D13 engine.

To remove the injector sleeve here there are 2 special tools used

Injector sleeve removal tool
Part Number
Puller = 88800387
Sleeve = 88800460

To install the injector sleeve here there is one special tool used

Injector sleeve installation tool
Part Number
Tappet = 88800196

Torque bolt yoke injector = 80 Nm

Curious about how to remove and install the injector sleeve on the Volvo D13 Engine, keep watching the video until it's finished.

Don't forget to support this channel by SUBSCRIBE, LIKE and SHARE.

Subscribe Gratiiissss:    / @biggyferi  

Review of the Volvo D11 A 370 Engine || Diesel Engine Component Name and Function:    • VOLVO TRUCK || Review Engine D11 A 37...  

HOW TO Change the Clutch VOLVO TRUCK:    • Disc Clutch Replacement on Volvo Truc...  

How to Measure VOLVO TRUCK Clutch || CLUTCH WEAR CHECK:    • CARA MENGUKUR KAMPAS KOPLING VOLVO TR...  

Unboxing Volvo truck Manual Transmission || VTO ​​2514 B:    • Volvo Transmission VTO2514B || Volvo ...  

#InjectorSleeveInstallationAndRemoval
#InjectorCupsVolvoD13
#InjectorSleeveVolvoD13Engine