SCULPFUN S6 PRO vs S6 - Which Laser Engraver Is The Best For YOU? [2021 Performance Comparison Test]

Here is an in-depth review and the performance test comparing the Sculpfun S6 and Sculpfun S6 pro engraving machines. I will test performance of these laser engravers by engraving wood, wood laser cutting, cutting acrylic (plexi glass), hardwood, engraving anodized aluminium and cutting cardboard. I will also evaluate the results and measure the laser focus beam size to check if the machines have rectangular or square focus spot.

For more information, discount coupons and detailed images of the test results, visit
https://hobbylasercutters.com/sculpfu...

On the link above, I have tested the machine with a standard wood engraving pattern (power scale, interval test and photo engraving), a focus distance test, and plywood and hardwood cutting test. I also measured the focus spot size by engraving a test pattern on anodized aluminium and used a microscope to measure the beam size.

BUY THROUGH THESE LINKS (Affiliate links, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you have even lower price!):
**************************************************************************
If you want to get Banggood DISCOUNT COUPONS for these machines, check at the end of each review here: https://hobbylasercutters.com/laser-r...
**************************************************************************

Also check out these lasers(Review video link below):
Sculpfun S6 Pro: https://hobbylasercutters.com/go/scul...
Sculpfun S6 (a bit weaker budget version): https://hobbylasercutters.com/go/scul... (use coupon code BGbd6806 and get it for 209$!)

Amazon:
Sculpfun S6 Pro: https://amzn.to/38nvyJO
Sculpfun S6: https://amzn.to/3gM4zMC

Aliexpress:
https://bit.ly/2Y8xzYp

USE PROPER LASER SAFETY GLASSES (O.D 6+):
https://hobbylasercutters.com/go/best... (you only have two eyes!)

The prices at Banggood INCLUDE CUSTOMS and IMPORT TAXES, so there are no additional costs when the machine arrives in your country! Choose Ocean Shipping, EU Priority Line, Priority Direct Mail or European Railway Direct Mail. These shipping methods have no import taxes and customs duties, because Banggood takes care of them in advance!

See how Sculpfun performs compared to Atomstack A5 Pro:
   • ATOMSTACK A5 PRO vs. SCULPFUN S6 PRO:...  


0:00 Intro
0:47 Engraving test in Poplar plywood
3:28 Anodized aluminium engraving
4:43 Analyzing the focused beam size
5:43 Focus size vs distance test
7:13 Plywood cutting test
8:47 Pine and Beech wood cutting test
9:57 Acrylic cut test
10:38 Conclusion

I think the Sculpfun S6 pro is better than Atomstack A5 Pro, Ortur Laser Master 2, Eleksmaker, Neje Master 2, Nasum A5 Pro and similar machines I have seen so far. It has a lot of power and the smallest dot size of 0.08mm square. It is capable of very detailed engravings.

Machine supports LaserGRBL or Lightburn software.

Spot Compressed Ultra-thin Focus Laser:
The latest 5.5W LD+FAC spot compression laser has an ultra-fine 0.08mm square laser focus, which is 2 times thinners than ordinary lasers and has a higher energy density. In the comparison of the cutting effect of wood/acrylic , the LD+FAC laser engraving traces are thinners, and the cutting penetration of the laser is stronger. Can cut through plywood in just a few passes!

New Eye Protection Design:- The laser filter cover filters 98% of the ultraviolet light to eye, You and the people around you can watch laser engraving without wearing goggles, although googles are included and recommended.

Fast Focusing Design:- S6 Pro combined fixed focus laser and sliding design . You only need to slide the laser and tighten the screw to complete the focusing.

Solid and Quick Assembly Structure Design:- The all-metal structure design makes the machine more solid, and improve the accuracy of engraving. The whole structure is designed for quick installation, it usually takes 10-20 minutes to finish installation.

The machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows/MAC system, engraving file supports JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.

Large engraving area:The 410x420mm large engraving area can meet various engraving needs.There is a power switch on the machine for emergency power off.

Ventilation box video:
   • Atomstack A5 20W Best Budget Laser En...  

FREE LASER CUTTER BOX GENERATORS:
https://makerdesignlab.com/tutorials-...

#banggood #laserengraver #sculpfun

I hope you enjoyed this video.
And SMASH that LIKE button! It helps a lot!

BUT DO NOT CLICK THIS - https://bit.ly/2BYOIoR
Subscribe for more and tell me in the comments what you like the most or what should I create next.

Follow me on Facebook and Instagram

  / jtmakesit  
  / jt_makes_it  
for spoilers on what I am currently working on, behind the scenes and other extras!