Скачать или смотреть Running pfSense Firewall and Router in a Proxmox VM

#pfSense #VirtualMachine #Proxmox #Firewall

Full steps can be found at https://i12bretro.github.io/tutorials...

--------------------------------------------------------------------
What is pfSense?
--------------------------------------------------------------------
pfSense is a firewall/router computer software distribution based on FreeBSD. The open source pfSense Community Edition (CE) and pfSense Plus is installed on a physical computer or a virtual machine to make a dedicated firewall/router for a network. It can be configured and upgraded through a web-based interface, and requires no knowledge of the underlying FreeBSD system to manage. - https://en.wikipedia.org/wiki/PfSense
 
   01. Download the pfSense AMD64 .iso  https://www.pfsense.org/download/
   02. Extract the downloaded pfSense .gz
   03. Log into the ProxMox web UI
   04. Select a storage from the left navigation pane to upload the .iso to
   05. Select ISO Images in the left sub-navigation pane
   06. Upload the pfSense .iso file to the ProxMox ISO image library
   07. Right click the ProxMox node name ≫ Create VM
   08. Type pfSense in the name field and set a unique VM ID ≫ Next
   09. On the OS tab, set the Type field to Linux, Version to 5.x - 2.6 Kernel and select the pfSense .iso in the ISO Image field ≫ Next
   10. On the System tab, leave the defaults ≫ Next
   11. On the Hard Disk tab, set the Disk size field to 8 ≫ Next
   12. On the CPU tab, set Cores field to 2, Type field to Host ≫ Next
   13. On the Memory tab, set the Memory to 1024 and Uncheck Ballooning Device ≫ Next
   14. On the Network tab, set the Model field to VirtIO (paravirtualized), Uncheck the Firewall box ≫ Next
   15. Verify the summary and click Finish
   16. Click the pfSense VM in the left navigation menu ≫ Select Hardware from the left sub-navigation menu
   17. Click Add ≫ Network Device
   18. Set the Model field to VirtIO (paravirtualized), Uncheck the Firewall box ≫ Click Add
   19. Select Options from the left sub-navigation menu ≫ Double click Use tablet pointer ≫ Uncheck the Enabled box ≫ Click OK
   20. Right click the pfSense VM in the left navigation pane ≫ Start
   21. Click console in the left sub-navigation menu
   22. Press Enter to Boot Multi- user
   23. Select Install pfSense ≫ Press Enter
   24. Select the keyboard mapping to use ≫ Press Enter
   25. Select Auto (UFS) BIOS Guided Disk Setup ≫ Press Enter
   26. Wait for pfSense to copy files and install
   27. At the Manual Configuration prompt select No ≫ Press Enter
   28. Select Reboot ≫ Press Enter
   29. Navigate back to the Hardware options
   30. Double click the CD/DVD Drive ≫ Select Do not use any media ≫ Click OK
   31. Select Shutdown ≫ Reset ≫ Yes to restart the VM
   32. Click console in the left sub-navigation menu
   33. Welcome to the pfSense terminal
 
--------------------------------------------------------------------
Configuring Network Interfaces and Web UI
--------------------------------------------------------------------
   01. At the prompt to setup VLANs type n ≫ Press Enter
   02. Enter a WAN interface name ≫ Press Enter
   03. Enter a LAN interface name ≫ Press Enter
   04. When asked Do you want to proceed? type y ≫ Press Enter
   05. At the pfSense menu, select Set interface(s) IP address by typing 2 and pressing Enter
   06. If asked to configure DHCP on the WAN interface type n ≫ Press Enter
   07. Enter a LAN IP address on the same subnet as your LAN
   08. At the bit count prompt type 24 ≫ Press Enter
   09. Enter an IPv4 upstream gateway ≫ Press Enter
   10. At the IPv6 DHCP prompt type n ≫ Press Enter
   11. Leave the IPv6 address blank and press Enter
   12. At the DHCP server prompt type n ≫ Press Enter
   13. At the revert to HTTP prompt type y ≫ Press Enter
   14. The http address of the pfSense Web UI will be displayed
   15. Press Enter to return to the main menu
   16. Open a new browser tab and navigate to the web UI http address
   17. Log into the web UI with the username admin and password pfsense
   18. Select System ≫ User Manager from the top navigation
   19. Click the edit icon across from the admin user
   20. At the pfSense Welcome screen click Next and Next again
   21. Enter a hostname, domain and DNS servers for the VM ≫ Click Next
   22. Set the server timezone ≫ Click Next
   23. Leave the defaults on the WAN Interface setup ≫ Click Next
   24. Set and confirm a new password for the admin user
   25. Click the Reload button
   26. Enjoy exploring pfSense
 


Connect with me and others ###
★ Discord:   / discord  
★ Reddit:   / i12bretro  
★ Twitter:   / i12bretro