How to Replace Front Strut 2007-2009 Saturn Aura

Buy Now!
New Strut & Spring Assembly from 1AAuto.com https://trq.video/ib-1ASTS00900

This video shows you how to install front struts on your 2007-2009 Saturn Aura. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

This repair was done on a 2007 Saturn Aura XE 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Saturn Aura
2008 Saturn Aura
2009 Saturn Aura

Tools you will need:
• 17mm Wrench https://trq.video/oFr-1AXAA00010
• 10mm Socket https://trq.video/oax4-1AXAA00017
• 13mm Socket https://trq.video/oaKA-1AXAA00015
• 18mm Socket
• 19mm Socket
• Locking Pliers https://trq.video/ohb-1AXAA00139
• 1/2 Inch Impact Gun https://trq.video/okA-1AXAA00252
• Torque Wrench https://trq.video/o9U-1AXAA00044
• Hammer

Subscribe:    / @trq  

Check out our playlist:
Saturn Aura 2007-2009 1st Generation:    • Saturn Aura 2007-2009 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.