How to Replace Front Upper Control Arm 2007-2014 Cadillac Escalade

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ib/1ASFU00198

Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2007-2014 Cadillac Escalade.

• Check here for more videos on the 2007-14 Cadillac Escalade:    • Cadillac Escalade 2007-14 3rd Gen  

This process should be similar on the following vehicles:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• Pocket Screwdriver
• Pry Bar http://1aau.to/oa/1AXAA00020
• 21mm wrench
• 10mm Socket http://1aau.to/ob/1AXAA00017
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 22mm Socket http://1aau.to/oa/1AXAA00266
• Pickle Fork
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Bungee Cord
• Copper Anti-Seize
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Rubber Mallet http://1aau.to/oa/1AXAA00413
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Cadillac Escalade 2007-14 3rd Gen:    • Cadillac Escalade 2007-14 3rd Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.