Turnigy 9X8C Range Test

Описание к видео Turnigy 9X8C Range Test

After last crash I decided to perform a range test of the receiver which was onboard. Transmitter is the same, Radiomaster TX16S, hanging on a strap around the neck.

As I haven't assistant the Losi Night Crawler will be the assistant. It will move away the receiver.

On the radio I programmed 5th channel to change PWM value from 1000 to 2000 in 0.5 sec, then pause 0.5 sec and back in a cycle. A servo connected to 5th channel. The flag is mounted on bamboo stick which is glued to servo arm. Waving flag should show the good signal.

Let's test!

Комментарии

Информация по комментариям в разработке

Похожие видео