How To cut 10mm Carbonsteel using 1.5kw

In this video you can learn how to cut big thickness with 1. 5kw
Advantages of Fiber Laser Cutting:
Cutting 10mm carbon steel using a fiber laser is well within the capabilities of modern fiber laser cutting machines. Fiber lasers are known for their efficiency and precision when it comes to cutting various metal materials, including carbon steel. Here's some information to consider
High Cutting Speed: Fiber lasers can cut through carbon steel at relatively high speeds, making them suitable for industrial production.

Precision: Fiber lasers offer exceptional precision, allowing you to achieve clean and accurate cuts even on thicker materials.

Minimal Heat Affected Zone: Fiber lasers generate less heat, resulting in a smaller heat-affected zone (HAZ) and reducing the risk of warping or distortion in the cut area.

Flexibility: Fiber lasers can handle a wide range of material thicknesses, making them versatile for various applications.

Cost-Efficiency: Fiber lasers are energy-efficient and require less maintenance compared to other cutting methods.

Parameters to Consider
Power: The power of the fiber laser will determine the cutting speed and thickness capacity. For 10mm carbon steel, a laser with around 4-6 kW power should be suitable.

Gas Selection: Oxygen is commonly used as an assist gas when cutting carbon steel to aid in the oxidation process and assist in material removal.

Focus and Nozzle: Proper focusing and selection of the nozzle diameter are crucial for achieving clean and precise cuts.

Cutting Speed: Fiber lasers can cut carbon steel at different speeds depending on the power of the laser and the desired cut quality. Adjusting the cutting speed may affect the quality of the cut and the HAZ.

Assist Gas Pressure: Proper assist gas pressure helps to blow away molten material from the cut and maintain cut quality.

Machine Calibration: Ensure that your fiber laser cutting machine is properly calibrated to achieve accurate and consistent results.

It's important to note that the specific parameters may vary based on the type and brand of the fiber laser machine you're using, as well as the characteristics of the carbon steel being cut. Consulting the machine's manual or seeking guidance from the manufacturer can provide you with more precise recommendations for cutting 10mm carbon steel.

Always perform test cuts and adjustments on scrap materials before running production cuts to optimize the settings for your specific machine and material.

#CarbonSteelCutting
#MetalCutting
#FiberLaserCutting
#PrecisionCutting
#MetalFabrication
#IndustrialCutting
#10mmSteelCutting
#MetalProcessing
#LaserCuttingTechnology
#CuttingSolutions
#ManufacturingProcesses
#MaterialCutting
#FiberLaserTechnology
#CNCMachining

#MetalArtwork
#MetalDesign
#Engineering
#MetalWorking
#CuttingParameters
#LaserCutter