Ax24 Furitek Stinger Combo Issue

So this rig really is a nightmare. Seemed to have worked out most of its issues that axial let slide by to get it to market. Then once I installed the Stinger Combo for it another pretty serious issue arose, drive shaft grinding. So now when your going downhill and twisting the micro komodo hits the driveshaft so badly its actually gouging the driveshaft and bogs the motor out. Tried moving the shocks around from stock to the 48mms, moving the mounting locations, even put in the stiffer springs, still hits it. This was a serious issue overlooked by Furitek. If only they would of mounted the motor about 2-3mm towards the rear of the mounting plate I think this could of been prevented. Now Ive gotta figure out a way to make this work. Might need to just leave this Ax24 platform and move all the guts to a diff chassis like the Scythe. But for now Im going to try to make it work somehow, just not sure what Ive gotta do to make that happen :(