{862} XR2206 Signal Generator Kit

{862} XR2206 Signal Generator Kit. i shared the assembly and testing of this diy kit. Signal Generator Kit, XR2206 Precise Function Signal Generator Frequency Module Signal Generator DIY Kit. Good precision: the XR2206 function signal generator is precise, with a transparent case box shell for good assemble; Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHz
Parameters: Voltage Supply: 9-12V DC Input; Waveforms: Square, Sine, Triple-cornered ; Impedance: 600 Ohm + 10%; Frequency: 1Hz-1MHz; Amplitude: 0-3V at 9V DC; Input Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kaHz
Sine wave parameters: Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHz
Square wave parameters: Amplitude: 8V (no load) at 9V DC Input; Rise Time: less than 50ns (at 1KHz); Fall Time: less than 30ns (at 1KHz); Symmetry: less than 5% (at 1KHz)
Good precision: the XR2206 function signal generator is precise, with a transparent case box shell for good assemble; Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHz
Parameters: Voltage Supply: 9-12V DC Input; Waveforms: Square, Sine, Triple-cornered ; Impedance: 600 Ohm + 10%; Frequency: 1Hz-1MHz; Amplitude: 0-3V at 9V DC; Input Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kaHz
Sine wave parameters: Amplitude: 0-3V at 9V DC input; Distortion: less than 1% (at 1KHz); Flatness: +0.05dB 1Hz - 100kHz
Square wave parameters: Amplitude: 8V (no load) at 9V DC Input; Rise Time: less than 50ns (at 1KHz); Fall Time: less than 30ns (at 1KHz); Symmetry: less than 5% (at 1KHz)
Triple-cornered wave: Amplitude: 0-3V at 9V DC input; Linearity: less than 1% (up to 100 KHz) 10 mA

1. The welding installation considerations, follow these steps:
2. The components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.
3. Welding IC socket, terminal blocks, finally socket, adjustable potentiometer.
Insert the supply, supply for 5.5 x 2.1 port, inside and outside is negative polarity; Fitting for 9-12 v supply voltage, and the waveform may not be stable for more than 12V.
Debug steps:
1. After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip!
2. Check IC for errors, if any, please correct in time.
size: 12 x 8 x 2 cm
You are Invited to Join Haseeb Electronics
   / @haseebelectronics  

#xr2206 #signal #generator
{862}, XR2206 Signal Generator Kit, xr2206 function generator, xr2206 function generator assembly, xr2206 function signal generator, xr2206 signal generator, xr2206 synth, xr2206 high precision signal generator, xr2206 function signal generator diy kit, covvy xr2206 high precision function signal generator diy kit, signal generator kit xr2206, xr2206, function generator, signal generator, diy function generator kit, diy fucntion generator kit, fucntion signal generator diy kit, xr2206 fucntion signal generator diy kit, signal generator kit, function signal generator diy kit, function generator kit, xr2206 function generator kit, signal generator review, xr2206 kit, square wave, triangle wave, sine wave
00:00 XR2206 signal generator kit diy
01:10 how to assemble xr2206 function generator kit
09:33 xr2206 function generator functional testing