|| DIY || Lenovo ThinkPad T460p keyboard Replacement

DIY - Lenovo ThinkPad T460p keyboard Replacement

1. Use the flat end of the keyboard multi-tool to slide the keyboard frame forward by 2.5 mm (0.1 inch). The screw heads beneath the keyboard frame are exposed.

Note: Do not press or hold the keys while sliding the keyboard frame. Otherwise, the keyboard frame cannot be moved. battery

2. Use the cross end of the keyboard multi-tool to loosen the screws. battery

3. Pivot the keyboard slightly upward as shown by the arrow [3] until you can see the connectors on the bottom side of the keyboard. Then turn over the keyboard as shown by the arrow [4]. battery

4. Put the keyboard on the keyboard bezel assembly and detach the connectors. Then remove the keyboard. battery

When Installing---------------------------

1. Attach the connectors and then turn over the keyboard. battery

2. Insert the keyboard into the keyboard bezel. Ensure that the front edge of the keyboard is under the frame of the keyboard bezel. battery

3. Ensure that the screw heads are completely exposed. Otherwise, reveal the screw heads by sliding the keyboard frame forward with the flat end of the keyboard multi-tool. battery

4 .Tighten the screws with the cross end of the keyboard multi-tool to secure the keyboard in place. battery

5. Slide the keyboard frame backward by 2.5 mm (0.1 inch) with the flat end of the keyboard multi-tool to hide the latches of the keyboard frame under the keyboard bezel.

6. Insert the flat end of the keyboard multi-tool into the gaps between the keyboard frame and the keys to push the keyboard frame backward. Ensure that there is no gap between the keyboard frame and keyboard bezel.

7. Install the keyboard rubbers.