How to Replace Throttle Body 08-12 Jeep Liberty

Buy Now!
New Throttle Body Assembly from 1AAuto.com https://trq.video/ia-1ATBA00029

Rough idle, poor performance, and a check engine light are all signs of throttle body problems. If a thorough cleaning didn’t resolve the issues, you may need to replace the assembly. This video shows you how to install a new, engineered to fit TRQ throttle body on your 2008-12 Jeep Liberty.

• Check here for more videos on the 2008-12 Jeep Liberty:    • Jeep Liberty 2008-2012 2nd Gen  

This repair was done on a 2010 Jeep Liberty and the process should be similar on the following vehicles:
2008 Jeep Liberty
2009 Jeep Liberty
2010 Jeep Liberty
2011 Jeep Liberty
2012 Jeep Liberty

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oaP6-1AXAA00013
• 10mm Socket https://trq.video/oaAm-1AXAA00017
• 8mm Socket https://trq.video/oaAm-1AXAA00017
• Torque Wrench https://trq.video/oabT-1AXAA00044
• Drill
• Cloth Rags https://trq.video/otW-1AXSS00035

Subscribe:    / @trq  

Check out our playlist:
Jeep Liberty 2008-2012 2nd Gen:    • Jeep Liberty 2008-2012 2nd Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.