Project Drag Slash | Custom Build

Learn More: http://www.traxxas.com/news/custom-dr...

Model/Parts Used:

Slash VXL w/On-Board Audio
http://www.traxxas.com/products/model...
or
http://www.traxxas.com/products/model...

Funny Car Wheels/Tires (rear)
http://www.traxxas.com/products/parts...

Front Wheels
http://www.traxxas.com/products/parts...

Stub Axles (rear)
http://www.traxxas.com/products/parts...

Tires, street slicks (front)
http://www.traxxas.com/products/parts...

Suspension arms (front)
http://www.traxxas.com/products/parts...

Suspension arms (rear)
http://www.traxxas.com/products/parts...

Bandit Camber Links
http://www.traxxas.com/products/parts...

Bandit Half-shaft axles
http://www.traxxas.com/products/parts...

Turnbuckles, toe-links
http://www.traxxas.com/products/parts...

Front bumper
http://www.traxxas.com/products/parts...

Wheelie bar assembly
http://www.traxxas.com/products/parts...

Button-head screws (3x20mm)
http://www.traxxas.com/products/parts...

Shock Rebuild Kit
http://www.traxxas.com/products/parts...

Front Axles
http://www.traxxas.com/products/parts...

Suspension Pin Set
http://www.traxxas.com/products/parts...

Button-head screws (3x25mm)
http://www.traxxas.com/products/parts...

Lock nuts (3mm)
http://www.traxxas.com/products/parts...

Double-sided adhesive (for OBA sound module)
http://www.traxxas.com/products/parts...

Blue Aluminum Wheels for Wheelie Bar
http://www.traxxas.com/products/parts...

Shoulder screws
http://www.traxxas.com/products/parts...


Aftermarket Parts:
14mm Wheel Hexes (needed if using #6968 Funny Car wheels)

Compatible RC body:
http://parmapse.shptron.com/p/68-musc...
http://parmapse.shptron.com/p/69-r-t-...
http://parmapse.shptron.com/p/65-musc...

Magnetic Body Mounting Kit
http://www.prolineracing.com/accessor...

Tools Used:
-1.5mm, 2mm, & 2.5mm hex tools
- 5.5mm & 7mm nut drivers
- Needle nose pliers
- Hobby knife
- Electric drill
- 2mm, 2.5mm, & 1/8in drill bits
- Body reamer
- RC body paint
- RC tire glue
- All-purpose cleaner
-4mm wrench
- Small flathead screwdriver
- Side cutters
- RC body scissors (curved & straight)
- U-joint wrench
- Sheet of paper (for painting)
- Permanent marker (to mark position for OBA speakers)
- Table vise
- Dremel tool with cutting disk and sanding drum
- Microfiber cloth
- Safety glasses

Wear proper safety goggles and use caution when working with rotary tools or general hobby tools. This project build should only be performed with the supervision of a responsible and knowledgeable adult.