How to Replace Front CV Axle 2002-2007 Jeep Liberty

Buy Now!
New CV Axle Shaft from 1AAuto.com http://1aau.to/ia/1AACV00179

A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one in your 2002-2007 Jeep Liberty.

This process should be similar on the following vehicles:
2002 Jeep Liberty
2003 Jeep Liberty
2004 Jeep Liberty
2005 Jeep Liberty
2006 Jeep Liberty
2007 Jeep Liberty

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 10mm Wrench http://1aau.to/oa/1AXAA00010
• 17mm Wrench http://1aau.to/oa/1AXAA00010
• 21mm wrench
• 17mm Socket http://1aau.to/oa/1AXAA00015
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 36mm Socket http://1aau.to/oa/1AAST00006
• Brake Caliper Hanger http://1aau.to/oa/1AXAA00084
• Dead Blow Hammer http://1aau.to/oa/1AXAA00091
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• E16 Inverted Torx Socket
• 1/2 Inch Ratchet http://1aau.to/oa/1AXAA00043
• 3/8 Inch Drive Ratchet http://1aau.to/oa/1AXAA00015
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oe/1AXAA00044
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Pick http://1aau.to/oa/1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Jeep Liberty 2002-2007 1s Gen:    • Jeep Liberty 2002-2007 1s Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.