How to design and code–check a pile cap

The conventional Strut&Tie approach for discontinuity regions has a number of limitations, like lacking crack width checks. On the contrary, the CSFM (Compatible Stress Field Method) implemented in the IDEA StatiCa Detail application gives a much more accurate analysis of D-regions and allows engineers to easily do all ULS and SLS checks required by the design code.
This webinar brings insight into the solution of pile caps with the anchoring of steel and concrete column. The webinar's goal is to show what elements are used for anchors and how to apply the load to concrete and anchors for the variant with a steel column. The application of the internal forces from FEA and boundary conditions for piles is introduced in the second variant with concrete columns. We end up the webinar with the presentation of the results, mainly stress, cracks, and deflections.

Webinar content:
How to model pile caps
Which boundary conditions to use
How to apply the loads
Reinforcement design
Results interpretation - stress, cracks, and deflections

Try it on your own - get the free Trial license:
https://www.ideastatica.com/free-trial
and follow the step-by-step tutorial Concrete wall:
https://www.ideastatica.com/support-c...

Watch more webinars at https://www.ideastatica.com/support-c...