Optoma X600 DLP Projector Repair | No Light | No Start

This Optoma X600 was sent in because it was just sitting there flashing the LED. You could press power all you wanted and nothing would happen.
It became quickly obvious that the door switch had become detached and was hanging inside the casing.

Turns out the projector is used in an RV. Likely caught a bump and even in its case, had a bit of plastic damage. After some epoxy and fan repair, it was working fine and sent back to the owner.

If you happen to need a lamp for one of these use code YT50 here https://www.purelandsupply.com/optoma...

Check out ‪@SortedFood‬ They are fantastic!

Thanks for watching!

\o/

00:00 intro - check lamp area
02:58 examine damage
04:07 door switch found
04:44 Screw removal
07:30 bypass door switch
09:00 Fan noise/stalled fan
10:08 Fan repair
12:50 Initial testing
19:48 epoxy repair
22:10 Final assembly
28:06 Final Testing -‪@SortedFood‬ Food shoutout