How to Replace Right Rear Strut Assembly 2008-2012 Honda Accord

Buy Now!
New Strut Assembly Set from 1AAuto.com https://trq.video/ib-1ASSP01275
New Strut Assembly from 1AAuto.com https://trq.video/ia-1ASTS01221

This video shows you how to install a right rear strut assembly on your 2008-2012 Honda Accord. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

This repair was done on a 2010 Honda Accord LX-S 2.4L Coupe 2-Door FWD Manual and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord

Tools you will need:
• Phillips Head Screwdriver https://trq.video/oaQK-1AXAA00013
• Pry Bar https://trq.video/oDT-1AXAA00020
• 10mm Wrench https://trq.video/oGt-1AXAA00010
• 14mm Wrench https://trq.video/oGt-1AXAA00010
• 17mm Wrench https://trq.video/oGt-1AXAA00010
• 10mm Socket https://trq.video/oaAN-1AXAA00017
• 14mm Socket https://trq.video/oaPb-1AXAA00015
• 17mm Socket https://trq.video/oaPb-1AXAA00015
• 19mm Socket
• Dead Blow Hammer
• Trim Tool Set https://trq.video/oM8-1AXXX00006
• 1/2 Inch Ratchet
• Ratchet https://trq.video/oa22-1AXAA00016
• Socket Driver
• Socket Extensions https://trq.video/oaPb-1AXAA00015
• Torque Wrench https://trq.video/oacp-1AXAA00044
• Brake Grease
• Gloves https://trq.video/ord-1AXSS00048
• 10mm Allen Wrench
• 8mm Allen Wrench
• Center Punch https://trq.video/oi6-1AXAA00055
• Hammer
• Pick https://trq.video/ozF-1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2008-12 8th Gen:    • Honda Accord 2008-12 8th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.