Α Step-By-Step Video Guide on “How to Build a Small Wind Turbine”

This video describes the manufacturing process of a 2.4m rotor diameter small wind turbine as described in Hugh Piggott’s ‘Wind Turbine Recipe Book’, including manufacturing details for the wooden blades and hub, the generator stator and coils, the generator rotor and magnets, the generator metal support frame, and the wind turbine tail boom and vane.

Content
- Blade Rotor / 1. Blade Curving / 1. Chord - 0:29
- Blade Rotor / 1. Blade Curving / 2. Twist - 1:27
- Blade Rotor / 1. Blade Curving / 3. Thickness - 3:09
- Blade Rotor / 1. Blade Curving / 4. Airfoil - 8:55
- Blade Rotor / 1. Blade Curving / 5. Repairs - 10:41
- Blade Rotor / 1. Blade Curving / 6. Root Cut - 10:56
- Blade Rotor / 2. Rotor Hub - 11:07
- Blade Rotor / 3. Rotor Assembly / 1. Placing Rear Rotor Hub - 13:43
- Blade Rotor / 3. Rotor Assembly / 2. Placing Front Rotor Hub - 15:30
- Blade Rotor / 3. Rotor Assembly / 3. Making Rotor Hub Holes - 16:33
- Blade Rotor / 3. Rotor Assembly / 4. Finished Blade Rotor - 17:58
- Blade Rotor / 4. Rotor Balance - 18:11
- Steel Structures / 1. Metal Cutting And Welding Practice - 18:36
- Steel Structures / 2. Generator Frame - 18:56
- Steel Structures / 3. Tail Hinge - 26:10
- Steel Structures / 4. Tail Boom - 27:04
- Generator / 1. Moulds / 1. Rotor Moulds - 32:09
- Generator / 1. Moulds / 2. Stator Moulds - 33:26
- Generator / 2. Stator / 1. Coil Winding - 34:28
- Generator / 2. Stator / 1. Connecting Stator Coils - 39:42
- Generator / 3. Rotor / 1. Magnet Guide - 40:45
- Generator / 3. Rotor / 2. Jacking Holes - 43:03
- Generator / 3. Rotor / 3. Placing Magnets - 43:34
- Generator / 4. Castings / 1. Preparing Fiber Glass - 47:18
- Generator / 4. Castings / 2. Waxing Moulds - 48:38
- Generator / 4. Castings / 3. Casting Rotors - 48:58
- Generator / 4. Castings / 4. Casting Stator - 54:15
- Generator / 4. Castings / 5. Opening Moulds - 59:04
- Generator / 5. Assembly / 1. Mounting Back Rotor Disk - 18:36
- Generator / 5. Assembly / 2. Mounting Stator - 01:05:22
- Generator / 5. Assembly / 3. Mounting Front Rotor Disk - 01:07:21
- Generator / 5. Assembly / 4. Adjusting The Air Gap - 01:09:54
- Tail Vane - 01:11:18
- Wind Turbine Assembly - 01:11:26
- Wind Turbine Installation - 01:11:47
- Credits - 01:12:22

----------
Video download via tbd
Learn more at https://erigrid2.eu