The Perfect Outfeed Table\Workbench With Only 2x4's and Plywood

DIY Mobile Out-feed Table/Workbench for the DeWalt 10" DWE7491 Table Saw. Built in Drawer. Original Sawdust Collection without a vacuum. Built with unique leveling casters. all done with 2x4's and plywood, no special tools.

If you want to support the channel click a link to purchase any item you're interested in. From the purchase I make a very small amount and it doesn't cost you anything extra. I am not affiliated with any products used. Anything I link I recommend and I use myself.

• DEWALT 10-Inch Table Saw: https://amzn.to/3QAGPNK (Amazon)
• Swanson Tool CG100 Cutting Guide 100-Inch: https://amzn.to/3tIUgSM (Amazon)
• Leveling Casters Set of 4 Heavy Duty: https://amzn.to/40gxduH (Amazon)
• Bosch Jigsaw: https://amzn.to/45Qjufe (Amazon)
• 3M Xtract Cubitron Sand Paper: https://amzn.to/4738ts0 (Amazon)
• MAXPOWER Rubber Mallet: https://amzn.to/3QivosP (Amazon)
• Bosch 1617EVSPK Wood Router Tool Combo Kit: https://amzn.to/3QdgKDe (Amazon)
• BOSCH RA1181 Benchtop Router Table 27 in. x 18 in: https://amzn.to/3Mj283U (Amazon)
• Makita HS7600 Circular Saw: https://amzn.to/3Fyvsj6 (Amazon)
• Kreg KHC-Premium 3-inch Face Clamp: https://amzn.to/3FAtNJR (Amazon)
• Kreg R3 Jr. Pocket-Hole Jig System: https://amzn.to/3QynRaG (Amazon)
• Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes: https://amzn.to/3FykwlJ (Amazon)
• Makita BO5030 5" Random Orbit Sander: https://amzn.to/3Si0bs7 (Amazon)
• Heavy PVC Dust Collection Hose 2 1/2" x 20': https://amzn.to/3tRUp6A (Amazon)
• Akfix 705 Fast Adhesive CA Glue: https://amzn.to/46KJQ3G (Amazon)
• 1 Pair Soft-Close Drawer Slides 20 Inch: https://amzn.to/3s7gPjL (Amazon)
• WEN CL436R 4-Inch Right Angle Clamp: https://amzn.to/3tSyI6r (Amazon)
• CMT 251.042.10 10-Inch by 42 Tooth: https://amzn.to/3Ml9JPg (Amazon)
• Varathane Diamond Wood Finish: https://amzn.to/40aBM9S (Amazon)

Thanks for watching. This video has taken months to create so we hope you enjoy. We are hoping the audio turns out alright as we had a dying freezer in the background, which we didn't notice until we went to edit!

The size of the outfeed table is 88” long. 45.5” wide and 35.5” tall without the casters. 39” tall with. It took about 3 sheets of 3/4" plywood and roughly 20 2x4's With the drawer and sawdust collection you'll need another sheet of plywood

If you enjoyed this enough to read this far hit the like and subscribe button :)

0:00 Outfeed finished
0:07 Making 3x3's
2:00 Lap Joint
2:40 Assembling the Frame
9:17 Leveling Casters
10:38 Lower Storage
13:33 Assembly of The Work Bench
15:30 DeWalt Shelf
16:47 DeWalt Stopers
17:45 Arm Extensions
20:20 First coat of Polyurethane
20:46 Drawer Assumably
21:13 Second coat of Polyurethane
26:03 Sawdust Collection
30:56 FINAL coat of Polyurethane
31:14 Putting on Trim
33:51 Final Product