HP EliteBook Revolve 810 G1 disassembly تفكيك وتركيب جهاز اتش بي ايليت بوك واستعراض مكوناتة

HP EliteBook Revolve 810 G1 disassembly تفكيك وتركيب جهاز اتش بي ايليت بوك واستعراض مكوناتة
HP EliteBook Revolve 810 G1 disassembly and SSD, RAM upgrade options

Unlock and remove the battery.
Remove four hidden screws and other screws on the bottom case. You can remove the bottom cover
When bottom cover removed, you can get access to the RAM, wireless card and SSD
The HP EliteBook Revolve 810 G1 comes with a Samsung 8GB DDR3L-1600MHz memory
Remove one screw securing the SSD and take it out from its slot.
Remove one screw securing the mobile WWAN broadband module
Remove one screw securing the wireless card and unplug two antennas
Turn over the laptop. Lift up the keyboard and disconnect the keyboard cable
remove all visible screws under the keyboard
Remove the middle frame covered the motherboard
Heat sink and cooling fan
Change the processor thermal paste