Power Steering Pump Rebuild Land Rover Discovery 2

This is a power steering pump rebuild tutorial for a Land Rover Discovery 2. This unit is off of a 2003 SE.

Enjoy the roosters.

IMPORTANT NOTES

1) FAST FORWARD TO 24:36 AND PUT DOWEL IN PLACE BEFORE CONTINUING.
2) THE OBLONG RETAINER FOR THE ROLLERS HAS TWO SIDES. ONE WITH AN ARROW AND THE OTHER WITHOUT. PLACE RING WITH ARROW FACING DOWN.
3) FOLLOW AT YOUR OWN RISK. I HOLD NO RESPONSIBILITY FOR REBUILD FAILURE.

Tools needed:

•5mm allen or hex bit
•22mm socket
•Needle nose pliers
•Blue "removable" Locktite
•Power steering fluid (if needed)
•Torque wrench with minimum 10 lb/ft value
•PB Blast and impact gun to loosen high pressure fitting with 22mm socket (mine was cemented on)
•rags
•beer

Ball bearing:
https://rover.ebay.com/rover/0/0/0?mp...

Gasket and seal kit:
https://rover.ebay.com/rover/0/0/0?mp...

Low pressure reservoir hose:
https://www.rockauto.com/en/catalog/l...

Power steering flush by JUKE179r:
https://landroverforums.com/forum/dis...

How to remove pump by Atlantic British:
   • Power Steering Pump Replacement on Di...