Скачать или смотреть The BEST way to put Fuel in a Wood Mizer Sawmill

Why is it always the BEST way to do something? The best way fuel your sawmill, the best way to fuel your sawmill, the best sawmill fuel, the best sawmill log, the best way to run a sawmill.

Why dose everyone on youtube think they have the best way to do things. Only take what you need from these videos and lean what you can, then make it your own. The best fuel to put in your sawmill is 87 octane, or 91 octane or 95, or non ethanol, vs ethanol.

Here is what Kohler recommends;

NOTE: E15, E20 and E85 are NOT approved and
should NOT be used; effects of old, stale or
contaminated fuel are not warrantable.
Fuel must meet these requirements:
● Clean, fresh, unleaded gasoline.
● Octane rating of 87 (R+M)/2 or higher.
● Research Octane Number (RON) 90 octane minimum.
● Gasoline up to 10% ethyl alcohol, 90% unleaded is
acceptable.
● Methyl Tertiary Butyl Ether (MTBE) and unleaded
gasoline blend (max 15% MTBE by volume) are
approved.
● Do not add oil to gasoline.
● Do not overfill fuel tank.
● Do not use gasoline older than 30 days.

The Best way, gets more hits, or the best way is what people are searching for? I don't want people to think any of my videos are "the best way" I do hope something i say on one of my videos helps you find a way to so things with your sawmill, but lets not pretend that i know the best way.

Wood-mizer says you should clean your air filter every 8 hours of use, but there are still a lot of ways to clean and air filter on a sawmill.