How to Replace Rear Trailing Arm 2008-2013 Nissan Rogue

Buy Now!
New Trailing Arm from 1AAuto.com http://1aau.to/ia/1ASRL00048

This video shows you how to replace the rear trailing arm on your 2008-2013 Nissan Rogue.

This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Pry Bar http://1aau.to/oSb/1AXAA00020
• 18mm Wrench
• 22mm Wrench
• 18mm Socket http://1aau.to/oaeL/1AXAA00043
• 21mm Socket http://1aau.to/oaeL/1AXAA00043
• 22mm Socket http://1aau.to/onZ/1AXAA00266
• Dead Blow Hammer http://1aau.to/oSP/1AXAA00091
• 1/2 Inch Impact Gun http://1aau.to/osb/1AXAA00252
• 1/2 Inch Breaker Bar http://1aau.to/oqB/1AXAA00078
• Socket Driver
• Socket Extensions http://1aau.to/obqw/1AXAA00015
• Torque Wrench http://1aau.to/oaBw/1AXAA00044
• Gloves http://1aau.to/oZg/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses http://1aau.to/oSq/1AXAA00343
• Floor Jack http://1aau.to/o24/1AXAA00068
• Hammer http://1aau.to/oSP/1AXAA00091
• Jack Stands http://1aau.to/oRW/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.