Скачать или смотреть Low Armholes – Option 1 – Adjusting the Shoulder Seam - A Quick fix for your sewing pattern

Here’s a quick fix if your armhole is too low and you’ve already cut out your fabric.
.
.
1. Pin the shoulder seams to where you want your armhole to be. Then sew this new shoulder seam.
2. Adjust necklines if needed.
3. Pin out the sleeve from the shoulder tip down towards the hem. Check the arm movement.
4. If you can move ok, you can slash out on the sleeve pattern this amount.
5. If you can’t move ok, reduce the pinned amount until you can. Then you’ll slash that amount out.
6. Measure the sleeve and see if it fits in the new armhole. If it doesn’t, you’ll lower the cap height until it fits.
7. Recut the sleeves in your fabric.
8. Remove the old sleeves and sew the new sleeves in.
9. Don’t forget to adjust facings or linings accordingly.
.
It’s just a fix in case you don’t want to waste your fabric and totally start over 😫😆Shout out if you have any questions!


🧵✂️Download your Free Top Fitting Guide Here🧵✂️ This guide includes the top 5 most-liked fitting videos from my Instagram account @GinaReneeDesigns
https://www.ginareneedesigns.com/down...

The Fitting Book is all I wish I had known about fitting and pattern correction. Get yours here:
https://www.ginareneedesigns.com/the-...

Join the FREE Patternmaking Mini-Course here: https://www.ginarenee.com/offers/Fo62...