OpenWRT 10 Gbps - Install & Testing the Dell QLogic 57810 Dual Port 10 Gb Network Adapter

In this video, I am going to setup the Dell QLogic BCM57810 Dual SFP+ Port Ethernet Adapter with OpenWRT. After that, I will check out the throughput with iperf3 and openspeedtest. The tests were done in bridging mode (2 SFP+ ports in same network) and routing mode (2 SFP+ ports in different network).
This network adapter is fully supported by OpenWRT, all you need to do is to install the kmod-bnx2 package (contains Kernel module for the Broadcom BCM5706/5708/5709/5716 ethernet adapter)
Using the ZimaBoard with Intel N3450, I got 7.4Gbps iperf3 throughput with a simple routing test. When Software Offloading is enabled, the device can handle 9.4Gbps throughput with just 40% CPU.

Video timeframe:
00:00 - Intro
00:16 - The Dell QLogic 57810 Dual Port 10 Gb DA/SFP+ Overview
04:05 - Install the BCM57810 Driver on OpenWRT
07:39 - Check and Configure the BCM57810 Network Interfaces on LuCI
09:15 - Identify Physical Ports and Interface Naming
10:57 - Bridging Mode Explain (SFP+ Adapter in LAN)
12:57 - Routing Mode Explain
15:19 - Bridging Throughput Test with iperf3 & OpenSpeedTest
17:19 - Routing Throughput Test with iperf3 & OpenSpeedTest

- If you are interesting in the ZimaBoard, you can get it here https://bit.ly/3yIP80X or pre-order shop.zimaboard.com

That is all for this video. Thanks for watching and see you in the next one!